Pixel Spinner/Star Test

***Update Spring 2015…
These have been disassembled and rebuilt using RGB bullet pixel nodes. See new video here:

http://www.youtube.com/watch?v=TCrtGR…

Using 1/2″ PVC cut to 22″ and connecting 2 “T” connectors together with a bolt, I made the spinner. Each leg on the spinner has 5 pixels (RGB Pixel strips), with a total of 40 pixels. This was the prototype and took about 5 hours to build. The next one will be much easier now that I have it all written out and measured. These spinner legs store (collapsed) in an 18 gallon tote.